| Windows 7 DLL File Information - iassdo.dll |
The following DLL report was generated by automatic DLL script that scanned and loaded all DLL files in the system32 directory of Windows 7, extracted the information from them, and then saved it into HTML reports. If you want to view a report of another DLL, go to the main page of this Web site.
General Information
| File Description: | NPS SDO Component |
| File Version: | 6.1.7100.0 (winmain_win7rc.090421-1700) |
| Company: | Microsoft Corporation |
| Product Name: | Microsoft Windows Operating System |
| DLL popularity | Very Low - There is no any other DLL in system32 directory that is statically linked to this file. |
| File Size: | 315 KB |
| Total Number of Exported Functions: | 4 |
| Total Number of Exported Functions With Names: | 4 |
Section Headers
| Name | Virtual Address | Raw Data Size | % of File | Characteristics | Section Contains... |
|---|---|---|---|---|---|
| .text | 0x00001000 | 228,864 Bytes | 71.0% | Read, Execute | Code |
| .data | 0x00039000 | 14,336 Bytes | 4.4% | Write, Read | Initialized Data |
| .rsrc | 0x0003d000 | 58,880 Bytes | 18.3% | Read | Initialized Data |
| .reloc | 0x0004c000 | 19,456 Bytes | 6.0% | Read, Discardable | Initialized Data |
Static Linking
iassdo.dll is statically linked to the following files:msvcrt.dll
ATL.DLL
iassvcs.dll
ACTIVEDS.dll
ADVAPI32.dll
KERNEL32.dll
NETAPI32.dll
ole32.dll
OLEAUT32.dll
rtutils.dll
USER32.dll
WS2_32.dll
ntdll.dll
This means that when iassdo.dll is loaded, the above files are automatically loaded too. If one of these files is corrupted or missing, iassdo.dll won't be loaded.
General Resources Information
| Resource Type | Number of Items | Total Size | % of File |
|---|---|---|---|
| Icons | 0 | 0 Bytes | 0.0% |
| Animated Icons | 0 | 0 Bytes | 0.0% |
| Cursors | 0 | 0 Bytes | 0.0% |
| Animated Cursors | 0 | 0 Bytes | 0.0% |
| Bitmaps | 0 | 0 Bytes | 0.0% |
| AVI Files | 0 | 0 Bytes | 0.0% |
| Dialog-Boxes | 0 | 0 Bytes | 0.0% |
| HTML Related Files | 0 | 0 Bytes | 0.0% |
| Menus | 0 | 0 Bytes | 0.0% |
| Strings | 252 | 43,322 Bytes | 13.4% |
| Type Libraries | 2 | 55,844 Bytes | 17.3% |
| Manifest | 0 | 0 Bytes | 0.0% |
| All Others | 4 | 2,124 Bytes | 0.7% |
| Total | 258 | 101,290 Bytes | 31.4% |
Icons in this file
No icons found in this file
Cursors in this file
No cursors found in this file
Dialog-boxes list (up to 200 dialogs)
No dialog resources in this file.
String resources in this dll (up to 200 strings)
| String ID | String Text |
|---|---|
| 1 | Specifies the user requesting authentication. |
| 2 | Specifies the password of the user requesting authentication. |
| 3 | Specifies the password of the CHAP user requesting authentication. |
| 4 | Specifies the IP address of the NAS where the request originates (NPS only). |
| 5 | Specifies the physical port number of the NAS where the request originates. |
| 6 | Specifies the type of service that the user has requested. |
| 7 | Specifies the protocol that is used. |
| 8 | Specifies the framed address that is configured for the user. |
| 9 | Specifies the IP subnet mask that is configured for the user. |
| 10 | Specifies the routing method that is used by the user. |
| 11 | Specifies the name of filter list for the user requesting authentication. |
| 12 | Specifies the maximum transmission unit (MTU) that is configured for the user. |
| 13 | Specifies the compression protocol that is used. |
| 14 | Specifies the IP address of the host to which the user should connect. |
| 15 | Specifies the service that connects the user to the host. |
| 16 | Specifies the TCP port to which the user should connect. |
| 18 | Specifies the message displayed to the user when the authentication request is accepted or rejected. |
| 19 | Specifies the callback phone number. |
| 20 | Specifies the name of a location called by the NAS. |
| 22 | Specifies the routing information that is configured on the NAS for the user. |
| 23 | Specifies the IPX network number configured on the NAS for the user. |
| 24 | Specifies the attribute sent to the client in an Access-Challenge packet. |
| 25 | Specifies the classification of accounting records. |
| 26 | Specifies the support of proprietary NAS features. |
| 27 | Specifies the length of time, in seconds, before the session is terminated. |
| 28 | Specifies the length of idle time, in seconds, before the session is terminated. |
| 29 | Specifies the action that the NAS should take when service is completed. |
| 30 | Specifies the phone number dialed by the user. |
| 31 | Specifies the phone number from which the call originated. |
| 32 | Specifies the string that identifies the NAS that originated the request (NPS only). |
| 33 | Specifies the string sent by the proxy server when forwarding an Access-Request packet. |
| 34 | Specifies the host to which user is connected by the Local Area Transport (LAT) service. |
| 35 | Specifies the node to which user is connected by the Local Area Transport (LAT) service. |
| 36 | Specifies the Local Area Transport (LAT) group codes for which the user is authorized. |
| 37 | Specifies the AppleTalk network number for the link to the user. This only applies when the user is a router. |
| 38 | Specifies the AppleTalk network number that the NAS must query to allocate the user's AppleTalk node. |
| 39 | Specifies the AppleTalk default zone for the user. |
| 40 | Specifies whether the Accounting packet starts or stops a bridging, routing or terminal server session |
| 41 | Specifies the length of time, in seconds, for which the NAS has been sending the same accounting packet. |
| 42 | Specifies the number of octets received during the session. |
| 43 | Specifies the number of octets sent during the session. |
| 44 | Specifies the unique numeric string that identifies the server session. |
| 45 | Specifies which server authenticated an incoming call. |
| 46 | Specifies the length of time, in seconds, for which the session has been active. |
| 47 | Specifies the number of packets received during the session. |
| 48 | Specifies the number of packets sent during the session. |
| 49 | Specifies the reason that a connection was terminated. |
| 50 | Specifies the unique numeric string that identifies the multilink session. |
| 51 | Specifies the number of links in a multilink session. |
| 52 | Specifies the number of times that the Acct-Input-Octets counter has reached 4,294,967,295 and been reset to 0. |
| 53 | Specifies the number of times that the Acct-Output-Octets counter has reached 4,294,967,295 and been reset to 0. |
| 55 | Specifies that this attribute is included in an Accounting-Request packet to record the time that a specific event occurred on the NAS. The time is denoted in seconds, since midnight of January 1, 1970. |
| 60 | Specifies the CHAP challenge sent by the NAS to the CHAP user. |
| 61 | Specifies the type of physical port that is used by the NAS originating the request. |
| 62 | Specifies the maximum number of ports that the NAS provides to the user. |
| 63 | Specifies the port with which the user is connected by Local Area Transport (LAT). |
| 64 | Specifies the tunneling protocols used. |
| 65 | Specifies the transport medium used when creating a tunnel for protocols (for example, L2TP) that can operate over multiple transports. |
| 66 | Specifies the IP address of the initiator end of the tunnel. |
| 67 | Specifies the IP address of the server end of the tunnel. |
| 69 | Specifies the password used for authenticating to a remote server. |
| 70 | Specifies the user password for AppleTalk Remote Access Protocol (ARAP). |
| 71 | Specifies the information that the NAS sends to the user in the AppleTalk Remote Access Protocol (ARAP) flags packet. |
| 72 | Specifies the way in which the AppleTalk Remote Access Protocol (ARAP) zone list is used. |
| 73 | Specifies the AppleTalk Remote Access Protocol (ARAP) security module used in an Access-Challenge packet . |
| 74 | Specifies the AppleTalk Remote Access Protocol (ARAP) security module challenge or response. |
| 75 | Specifies the number of times the user can try to be authenticated before the NAS terminates the connection. |
| 76 | Specifies to the NAS whether or not it should echo the user's response as it is typed. |
| 77 | Specifies the nature of the user's connection. |
| 78 | Specifies the type of user profile used. This profile is sent in an Access-Accept packet from a RADIUS proxy server to a RADIUS proxy client (not to a NAS). |
| 79 | Specifies the encoding of Extensible Authentication Protocol (EAP) information to allow dial-in users to use EAP to authenticate without implementing EAP on the NAS. |
| 80 | Specifies that Access-Request packets are signed to prevent dictionary attacks on CHAP, ARAP, or EAP authentication methods. |
| 81 | Specifies the Group ID for a tunneled session. |
| 82 | Specifies the tunnel to which a session is assigned. |
| 83 | Specifies the relative preference assigned to each tunnel when more than one set of tunneling attributes is returned to the tunnel initiator. |
| 85 | Specifies the length of the interval (in seconds) between each interim update that the NAS sends. |
| 86 | Specifies the number of packets that are lost on a given link. |
| 87 | Specifies the port of the NAS that authenticates the user by using a text string. |
| 88 | Specifies the name of an assigned address pool that should be used to assign an address for the user. |
| 90 | Specifies the name used by the tunnel initiator during the authentication phase of tunnel establishment. |
| 91 | Specifies the name used by the tunnel terminator during the authentication phase of tunnel establishment. |
| 108 | Specifies the delay (in seconds) before the Ascend NAS calls the user back. |
| 120 | Specifies the port number for the modem that the Ascend NAS is using. |
| 121 | Specifies the slot number for the modem that the Ascend NAS is using. |
| 122 | Specifies the shelf number for the modem that the Ascend NAS is using. |
| 125 | Specifies the maximum time (in minutes) before the Ascend NAS terminates a connection. |
| 126 | Specifies the route preference for the Ascend NAS. |
| 131 | Specifies whether dial-out access is allowed. |
| 132 | Specifies the gateway used by the Ascend NAS. |
| 135 | Specifies the primary DNS name used by the Ascend NAS. |
| 136 | Specifies the secondary DNS name used by the Ascend NAS. |
| 139 | Specifies the IP address of the server on which the user has an account. |
| 141 | Specifies the shared secret of the server on which the user has an account. |
| 152 | Specifies that the user is a multicast client of the Ascend NAS. |
| 153 | Specifies the time (in seconds) that the Ascend NAS waits before accepting another packet from a multicast client. |
| 154 | Specifies the subnet mask that is being used for the local numbered interface. |
| 155 | Specifies the IP address of the numbered interface at the remote end of a link. |
| 156 | Specifies the permanent virtual circuit (PVC) for which the user profile is an endpoint. |
| 157 | Specifies whether the Frame Relay link becomes available automatically in a Frame Relay profile. |
| 158 | Specifies the association of a group of permanent virtual circuits (PVCs) within the Frame Relay profile. |
| 159 | Specifies the type of connection that is used by the Frame Relay profile. |
| 160 | Specifies the link management protocol that is used between the Ascend NAS and the Frame Relay switch in a Frame Relay profile. |
| 161 | Specifies the interval (in seconds) between Ascend NAS requests for full status reports in a Frame Relay profile. |
| 162 | Specifies the number of errors that occurred during Ascend-FR-DCE-N393-monitored events, causing the network to render user-originating procedures inactive. |
| 163 | Specifies the number of errors that occurred during Ascend-FR-DTE-N393-monitored events, causing the user to render the network-originating procedures inactive. |
| 164 | Specifies the DCE-monitored event count. A link is considered active if the value of the Ascend-FR-DCE-N393 attribute is not reached. |
| 165 | Specifies the DTE-monitored event count. A link is considered active if the value of the Ascend-FR-DTE-N393 attribute is not reached. |
| 166 | Specifies the Link Integrity Verification polling timer (in seconds). |
| 167 | Specifies the time that the unit waits between Status Inquiry messages. |
| 169 | Specifies the length of time (in seconds) that a terminal server connection must be idle before the Ascend NAS disconnects the session. |
| 170 | Specifies whether the Ascend NAS uses a terminal server idle timer and, if it does, whether both the user and the host must be idle before the Ascend NAS disconnects the session. |
| 171 | Specifies the method that the Ascend NAS uses to monitor traffic on a Multilink Protocol Plus (MP+) call. |
| 172 | Specifies the initial number of channels created by an Ascend NAS when originating certain calls. |
| 173 | Specifies the minimum number of channels that are used in a Multilink Protocol Plus (MP+) call. |
| 174 | Specifies the configuration of a static IPX route (Ascend only). |
| 175 | Specifies whether the NAS initiates FT1-AIM or FT1-B&O calls or waits for a remote end to initiate such calls. |
| 176 | Specifies the profile name of a backup profile for a permanent link. |
| 177 | Specifies the type of permanent connection used. |
| 178 | Specifies the permanent virtual circuits (PVCs) that are used by the WAN link. |
| 179 | Specifies the Data Link Connection Identifier (DLCI) that identifies the connection profile to the Frame Relay switch. |
| 180 | Specifies the name of the Frame Relay profile for this connection. |
| 181 | Specifies the password of the incoming caller on an AppleTalk remote access connection. |
| 182 | Specifies the unique IPX node address. |
| 183 | Specifies the IP address of the home agent in an ATMP operation. |
| 184 | Specifies the password sent by the remote agent the to home agent in an ATMP operation. |
| 185 | Specifies the connection profile, through which the home agent sends packets that are received by a mobile node in ATMP operation. |
| 186 | Specifies the UDP port remote agent that sends messages to the home agent. |
| 187 | Specifies the ID of a Multilink bundle (multichannel Multilink Protocol or Multilink Protocol Plus call). |
| 188 | Specifies the number of sessions that remain in a Multilink bundle (multichannel Multilink Protocol or Multilink Protocol Plus call). This information is reported in an Accounting-Stop packet. |
| 189 | Specifies the destination IP address of the first packed received through an authenticated connection. |
| 190 | Specifies the number of input octets that are received before authentication. |
| 191 | Specifies the number of output octets that are sent before authentication. |
| 192 | Specifies the number of input packets that are received before authentication. |
| 193 | Specifies the number of output packets that are sent before authentication. |
| 194 | Specifies the length of time (in seconds) before the session is terminated by the Ascend NAS. |
| 195 | Specifies the reason that a connection was terminated. |
| 196 | Specifies the state of the connection before it is terminated. |
| 197 | Specifies the data rate of the connection (in bits per second). |
| 198 | Specifies the length of time (in seconds) between the time that a call connects and the time that authentication is complete. |
| 199 | Specifies the length of time (in minutes) for which a cached token can remain alive between authentications if a call is idle (Ascend NAS only). |
| 200 | Specifies the method that RADIUS uses to handle passwords that received from users who are required to use a hand-held security card server. |
| 201 | Specifies whether additional authentication is required for Called Line Identification (CLID)-authenticated calls (Ascend NAS only). |
| 202 | Specifies the number of active sessions of the type of class specified in the Class attribute. |
| 203 | Specifies the Ascend NAS login name for PPP authentication. |
| 204 | Specifies the lifetime of cached token or hand-held security card authentication (Ascend NAS only). |
| 205 | Specifies the prompt for user input in the terminal server menu (Ascend NAS only). |
| 206 | Specifies a single menu item for an Ascend NAS user profile. |
| 208 | Specifies the number of days for which user's password is valid (Ascend NAS only). |
| 209 | Specifies the IP address to which Ascend NAS redirects packets from the user. |
| 210 | Specifies that the Ascend PPP implementation must not use slot compression when sending packets that are compressed through Van Jacobsen compression. |
| 211 | Specifies that the Ascend PPP implementation must use the value of 0x0037 value for the Van Jacobsen compression type. |
| 212 | Specifies the async control character map that the Ascend PPP implementation must use during the PPP session (Ascend NAS only). |
| 213 | Specifies an additional prompt (other than the login and password prompts) for user input (Ascend NAS only). |
| 214 | Specifies that the password is encrypted when passed between the RADIUS server and the Ascend NAS. This attribute is used in place of Ascend-Send-Passwd. |
| 215 | Specifies the value received from the dial-in user that is used to verify the encrypted password. |
| 216 | Specifies the mode of the IPX router. |
| 217 | Specifies an IP address pool for dynamic assignment. |
| 218 | Specifies the index number of the IP address pool that the user must use for dynamic address assignment. |
| 219 | Specifies whether the connection profile uses Frame Relay redirect mode (Ascend NAS only). |
| 220 | Specifies the name of the Frame Relay profile. |
| 221 | Specifies the presence of a Data Link Connection Identifier (DLCI) for the user profile in a Frame Relay redirect connection. |
| 222 | Specifies the method that the Ascend NAS uses to handle IPX Watchdog protocol requests during IPX bridging. |
| 223 | Specifies the length of time (in minutes) for which an Ascend NAS responds to IPX Watchdog protocol requests. |
| 224 | Specifies the IPX address that is used by the NAS when connecting to IPX routers that require numbered interfaces. |
| 225 | Specifies the virtual hop count of the route. |
| 226 | Specifies the type of phone number that the MAX dials. |
| 227 | Specifies the phone number that the Ascend NAS dials to reach the bridge, router, or node at the remote end of the link. |
| 228 | Specifies that IP routing is enabled. |
| 229 | Specifies that IPX routing is enabled. |
| 230 | Specifies that protocol-independent bridging is used for the current connection. |
| 231 | Specifies the protocol used for name-password authentication (following Called Link Identification [CLID] authentication). |
| 232 | Specifies the password sent by NPS to the remote end of a connection on outgoing calls. |
| 234 | Specifies the percentage of bandwidth used, after which the Ascend NAS adds or subtracts bandwidth. |
| 235 | Specifies the maximum number of channels allowed on a Multilink Protocol Plus (MP+) call. |
| 236 | Specifies the number of channels that the Ascend NAS adds when bandwidth changes either manually or automatically during a call. |
| 238 | Specifies the length of time (in seconds) that the Ascend NAS uses as a sample for calculating the average line utilization (ALU) for transmitted data. |
| 239 | Specifies the Dynamic Bandwidth Allocation (DBA) algorithm used for calculating the average line utilization (ALU) for transmitted data. |
| 240 | Specifies the threshold, in seconds, that the average line utilization (ALU) for transmitted data must exceed before the Ascend NAS adds bandwidth. This threshold is specified by the Ascend-Target-Util attribute. |
| 241 | Specifies the threshold, in seconds, that the average line utilization (ALU) for transmitted data must fall below before the Ascend NAS removes bandwidth from a session. This threshold is specified by the Ascend-Target-Util attribute. |
| 242 | Specifies the data filter for the Ascend NAS. |
| 243 | Specifies the call filter for the Ascend NAS. |
| 244 | Specifies the length of time, in seconds, that the Ascend NAS waits before clearing a call when a session is inactive. |
| 245 | Specifies the number of idle seconds that the Ascend NAS waits before using one of the channels of an idle link for a new call. |
| 246 | Specifies that callback is either enabled or disabled on the Ascend NAS. |
| 247 | Specifies the data service used by the Ascend NAS. |
| 248 | Specifies that the Ascend NAS use only the 56-Kbps portion of a channel (even when the full 64 Kbps channel is available for use). |
| 249 | Specifies the billing number for charges incurred on the line. |
| 250 | Specifies the T1 PRI service that is used by NAS. |
| 251 | Specifies the U.S Interexchange Carrier (IEC) that you use for long distance calls over a T1 PRI line. |
| 252 | Specifies a list of hosts to which a user can establish a Telnet session. |
| 253 | Specifies the IP address reporting to the calling unit during IPCP negotiations. |
| 254 | Specifies the percentage of bandwidth utilization, below which the Ascend NAS clears a single-channel Multilink Protocol Plus (MP+) call. |
| 4096 | Specifies the framed address configured for the user (for NPS internal use only). |
| 4097 | Specifies the phone number used for callback (for NPS internal use only). |
| 4098 | Specifies the phone number from which the call originated. |
| 4099 | Specifies the phone number from which the call originated (for NPS internal use only). |
| 4100 | Specifies the routing information configured on the NAS for the user (for NPS internal use only). |
| 4101 | Specifies that the user's dial-in properties are ignored. |
| 4102 | Specifies the time periods and days of week during which user is allowed to connect. |
| 4103 | Specifies the phone number dialed by the user. |
COM Classes/Interfaces
| Name | Type | Description |
|---|---|---|
| ISdo | Dispatch | |
| ISdoCollection | Dispatch | |
| ISdoDictionaryOld | Dispatch | |
| ISdoMachine | Dispatch | |
| ISdoMachine2 | Dispatch | |
| ISdoServiceControl | Dispatch | |
| ITemplateSdo | Dispatch | |
| SdoMachine | CoClass |
Exported Functions List
The following functions are exported by this dll:| DllCanUnloadNow | DllGetClassObject | DllRegisterServer | DllUnregisterServer |
Imported Functions List
The following functions are imported by this dll:- msvcrt.dll:
_CxxThrowException _XcptFilter __CxxFrameHandler __RTDynamicCast __dllonexit _amsg_exit _callnewh _except_handler4_common _initterm _lock _onexit _purecall _unlock _wcsicmp _wcsupr_s bsearch free isdigit iswdigit malloc memcpy memcpy_s memmove_s memset public: __thiscall exception::exception(char const * const &) public: __thiscall exception::exception(class exception const &) public: __thiscall exception::exception(void) public: virtual __thiscall exception::~exception(void) public: virtual __thiscall type_info::~type_info(void) public: virtual char const * __thiscall exception::what(void)const qsort sprintf_s swprintf_s towupper void __cdecl terminate(void) wcscat_s wcschr wcscpy_s wcscspn wcsncmp wcsncpy_s wcsrchr wcsspn wcstoul - ATL.DLL:
AtlComPtrAssign AtlInternalQueryInterface AtlModuleAddTermFunc AtlModuleGetClassObject AtlModuleInit AtlModuleRegisterServer AtlModuleRegisterTypeLib AtlModuleTerm AtlModuleUnregisterServer AtlModuleUpdateRegistryFromResourceD - iassvcs.dll:
IASGetDictionary IASGetLocalDictionary IASGlobalLock IASGlobalUnlock IASInitialize IASUninitialize - ACTIVEDS.dll:
ADsGetObject ADsOpenObject - ADVAPI32.dll:
CloseServiceHandle ControlService OpenSCManagerA OpenSCManagerW OpenServiceA OpenServiceW QueryServiceStatus QueryServiceStatusEx RegCloseKey RegConnectRegistryW RegOpenKeyExW RegQueryValueExW StartServiceW - KERNEL32.dll:
CloseHandle CreateEventW CreateFileW CreateThread DisableThreadLibraryCalls ExpandEnvironmentStringsW FormatMessageA GetComputerNameExW GetComputerNameW GetCurrentProcess GetCurrentProcessId GetCurrentThreadId GetFileInformationByHandle GetLastError GetModuleFileNameW GetSystemTimeAsFileTime GetTickCount GetVersion GetVersionExW InterlockedCompareExchange InterlockedDecrement InterlockedExchange InterlockedIncrement LocalFree OutputDebugStringA QueryPerformanceCounter QueueUserAPC SetEvent SetLastError SetUnhandledExceptionFilter Sleep SleepEx SwitchToThread TerminateProcess UnhandledExceptionFilter VirtualQuery WaitForSingleObject WaitForSingleObjectEx lstrcmpW lstrcmpiW lstrlenW ntdll!RtlDeleteCriticalSection ntdll!RtlEnterCriticalSection ntdll!RtlInitializeCriticalSection ntdll!RtlLeaveCriticalSection ntdll!RtlTryEnterCriticalSection - NETAPI32.dll:
NetWkstaGetInfo dsrole!DsRoleGetPrimaryDomainInformation logoncli!DsGetDcNameW netutils!NetApiBufferFree - ole32.dll:
CLSIDFromProgID CLSIDFromString CoCreateGuid CoCreateInstance CoCreateInstanceEx CoSetProxyBlanket CoTaskMemAlloc CoTaskMemFree OleRun StringFromGUID2 - OLEAUT32.dll:
LoadRegTypeLib SafeArrayAccessData SafeArrayCopy SafeArrayCreate SafeArrayCreateVector SafeArrayDestroy SafeArrayGetDim SafeArrayGetLBound SafeArrayGetUBound SafeArrayUnaccessData SysAllocString SysAllocStringByteLen SysAllocStringLen SysFreeString SysStringLen VariantChangeType VariantClear VariantCopy VariantInit - rtutils.dll:
TraceDeregisterA TracePutsExA TraceRegisterExW TraceVprintfExA - USER32.dll:
LoadStringW - WS2_32.dll:
GetAddrInfoW - ntdll.dll:
RtlAllocateHeap RtlFreeHeap RtlImageNtHeader