Main Page Windows 8 DLLs Windows 10 DLLs Feedback NirSoft Utilities
Windows 7 DLL File Information - nettrace.dll

The following DLL report was generated by automatic DLL script that scanned and loaded all DLL files in the system32 directory of Windows 7, extracted the information from them, and then saved it into HTML reports. If you want to view a report of another DLL, go to the main page of this Web site.

 

General Information

File Description: Network Trace Helper  
File Version: 6.1.7100.0 (winmain_win7rc.090421-1700)  
Company: Microsoft Corporation  
Product Name: Microsoft Windows Operating System  
DLL popularity Very Low - There is no any other DLL in system32 directory that is statically linked to this file.
File Size: 530 KB
Total Number of Exported Functions: 1
Total Number of Exported Functions With Names: 1
 

Section Headers

Name Virtual Address Raw Data Size % of File Characteristics Section Contains...
.text 0x00001000 424,448 Bytes 78.2% Read, Execute Code
.data 0x00069000 76,288 Bytes 14.1% Write, Read Initialized Data
.rsrc 0x00080000 4,096 Bytes 0.8% Read Initialized Data
.reloc 0x00081000 36,864 Bytes 6.8% Read, Discardable Initialized Data
 

Static Linking

nettrace.dll is statically linked to the following files:

msvcrt.dll
KERNEL32.dll
SHELL32.dll
ADVAPI32.dll
NETSH.EXE
ole32.dll
OLEAUT32.dll
SHLWAPI.dll
USER32.dll
WS2_32.dll
wevtapi.dll
IPHLPAPI.DLL
NDFAPI.DLL
Secur32.dll
tdh.dll
ntdll.dll
RPCRT4.dll

This means that when nettrace.dll is loaded, the above files are automatically loaded too. If one of these files is corrupted or missing, nettrace.dll won't be loaded.

 

General Resources Information

Resource Type Number of Items Total Size % of File
Icons 0 0 Bytes 0.0%
Animated Icons 0 0 Bytes 0.0%
Cursors 0 0 Bytes 0.0%
Animated Cursors 0 0 Bytes 0.0%
Bitmaps 0 0 Bytes 0.0%
AVI Files 0 0 Bytes 0.0%
Dialog-Boxes 0 0 Bytes 0.0%
HTML Related Files 1 4,353 Bytes 0.8%
Menus 0 0 Bytes 0.0%
Strings 138 36,000 Bytes 6.6%
Type Libraries 0 0 Bytes 0.0%
Manifest 0 0 Bytes 0.0%
All Others 4 4,302 Bytes 0.8%
Total 143 44,655 Bytes 8.2%
 

Icons in this file

No icons found in this file

 

Cursors in this file

No cursors found in this file

 

Dialog-boxes list (up to 200 dialogs)

No dialog resources in this file.

 

String resources in this dll (up to 200 strings)

String ID String Text
6000 List interfaces, providers and tracing state.
6100 Starts tracing.
6101 %1!s! Starts tracing. Usage: trace start [[scenario=]<scenario1,scenario2>] [[globalKeywords=]keywords] [[globalLevel=]level] [[capture=]yes|no] [[report=]yes|no] [[persistent=]yes|no] [[traceFile=]path\filename] [[maxSize=]filemaxsize] [[fileMode=]single|circular|append] [[overwrite=]yes|no] [[correlation=]yes|no|disabled] [capturefilters] [[provider=]providerIdOrName] [[keywords=]keywordMaskOrSet] [[level=]level] [[provider=]provider2IdOrName] [[keywords=]keyword2MaskOrSet] [[level=]level2] ... Defaults: capture=no (specifies whether packet capture is enabled in addition to trace events) report=no (specifies whether a complementing report will be generated along with the trace file) persistent=no (specifies whether the tracing session continues across reboots, and is on until netsh trace stop is issued) maxSize=250 MB (specifies the maximum trace file size, 0=no maximum) fileMode=circular overwrite=yes (specifies whether an existing trace output file will be overwritten) correlation=yes (specifies whether related events will be correlated and grouped together) traceFile=%%LOCALAPPDATA%%\Temp\NetTraces\NetTrace.etl (specifies location of the output file) Provider keywords default to all and level to 255 unless otherwise specified. For example: netsh trace start scenario=InternetClient capture=yes Starts tracing for the InternetClient scenario and dependent providers with packet capture enabled. Tracing will stop when the "netsh trace stop" command is issued or when the system reboots. Default location and name will be used for the output file. If an old file exists, it will be overwritten. netsh trace start provider=microsoft-windows-wlan-autoconfig keywords=state,ut:authentication Starts tracing for the microsoft-windows-wlan-autoconfig provider Tracing will stop when the "netsh trace stop" command is issued or when the system reboots. Default location and name will be used for the output file. If an old file exists, it will be overwritten. Only events with keyword 'state' or 'ut:authentication' will be logged. netsh trace show provider command can be used to display supported keywords and levels. Capture Filters: Capture filters are only supported when capture is explicitly enabled with capture=yes. Use 'netsh trace show CaptureFilterHelp' to display a list of supported capture filters and their usage.
6102 Stops tracing.
6103 %1!s! Stops tracing. Remarks: Stops a network tracing session currently in progress
6104 Converts a trace file to an HTML report.
6105 %1!s! Converts a trace file to an HTML report. Usage: convert [input=]tracefilename.etl [[output=]filename] [[dump=]CSV|XML|EVTX|TXT|No] [[report=]yes|no] [[overwrite=]yes|no] [[tmfpath=]pathname] Parameters: Tag Value input - Input ETL trace file output - Output file name (defaults to input name) dump - Output format (default = TXT) report - Generates an HTML report (default = no) overwrite - Overwrites existing files (default = no) tmfpath - Path to tmf files for decoding WPP traces Remarks: Converts the input ETL file to the specified format.
6106 Start a diagnose session.
6107 %1!s! Starts a diagnose session. Usage: diagnose [scenario=]<scenarioname> [[namedAttribute=]<attributeValue>] [[saveSessionTrace=]<yes|no>] [[report=]<yes|no>] [[capture=]<yes|no>] Defaults: saveSessionTrace=no (defaults to 'yes' if report=yes is specified) capture=no report=no Remarks: Starts a diagnose session
6108 Normalizes or filters a trace file to a new output file.
6109 %1!s! Normalizes or filters a trace file to a new output file. Usage: trace correlate [input=]tracefilename.etl [output=]newtracefilename.etl [[filter=]Activity_ID] [[overwrite=]yes|no] [[retaincorrelationevents=]yes|no] [[retainpii=]yes|no] [[retainglobalevents=]yes|no] Parameters: Tag Value input - Input ETL trace file output - Output file name filter - Output only events related to this Activity GUID overwrite - Overwrites existing files retaincorrelationevents - Retains correlation events retainpii - Retains events containing personally identifiable information retainglobalevents - Retains global events Defaults: filter=none overwrite=no retaincorrevents=no retainpii=yes retainglobalevents=yes Remarks: Filter activity ID is a GUID expressed in the form {xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx} Personally identifiable information includes packet capture events
6201 Shows tracing configuration.
6202 %1!s! Shows tracing configuration.
6203 Shows available scenarios.
6204 %1!s! Shows a list of available scenarios that may be used with the start command.
6205 Shows scenario information.
6206 %1!s! Shows scenario information. Usage: trace show scenario [name=]<scenarioname> Remarks: This displays additional information about a scenario including any attributes that may be required by the 'diagnose command and the list of providers that would be enabled for the specified scenario, along with the default keywords and levels that would be applied.
6207 Shows available providers.
6208 %1!s! Shows a list of available providers that may be used with the start command.
6209 Shows provider information.
6210 %1!s! Shows provider information that can be used with the start command. Usage: trace show provider [name=]<providerIdOrName> Remarks: This displays the keywords and levels that the specified provider supports. These keywords and levels may be used while starting a tracing session.
6211 List global keywords and levels.
6212 %1!s! Shows a list of global keywords and levels that may be used with the start command. Usage: trace show globalKeywordsAndLevels
6213 List available interfaces.
6214 %1!s! Shows a list of network interfaces. Usage: trace show interfaces
6215 List supported capture filters and usage.
6216 %1!s! List supported capture filters and usage. Usage: trace show CaptureFilterHelp
6217 Show helper class information.
6218 %1!s! Shows helper class name, description and list of dependent helper classes. This also lists possible root causes and repairs that may be returned by the helper class. Usage: trace show helperclass [name=]<helperclassname>
6301 Trace configuration: -------------------------------------------------------------------
6302 File location = %1!s!
6303 Available scenarios (%1!d!): -------------------------------------------------------------------
6305 Entry Point: %1!ws!
6306 Providers ---------
6307 Available Providers (%1!d!) -------------------------------------------------------------------
6308 Name: %1!s! Provider Guid: %2!s!
6309 Levels (value) - %1!d! element(s) -------------------------------------------------------------------
6310 Keywords (mask) - %1!d! element(s) -------------------------------------------------------------------
6311 Tracing session was successfully stopped.
6312 Status: Running Trace File: %1!s! Append: %2!s! Circular: %3!s! Max Size: %4!s! Report: %5!s!
6313 Provider: Name: %1!s! Provider Guid: %2!s! Level: %3!s! Keywords: %4!s!
6314 Provider: Name: %1!s! Provider Guid: %2!s! Default Level: %3!s! Default Keywords: %4!s!
6315 Report location = %1!s!
6316 Input file: %1!s! Dump file: %2!s! Dump format: %3!s! Report file: %4!s!
6318 Description: %1!ws! Interface GUID: %2!S! Interface Index: %3!d! Interface Luid: 0x%4!I64X!
6319 Attribute Name Type Required Description -------------- ---- -------- -----------
6320 Root causes found: %1!d!
6321 Root cause #%1!d! -------------- %2!ws!
6322 Repairs available: %1!d!
6323 Repair #%1!d! ---------- %2!ws!
6324 Diagnosing '%1!ws!' ...
6325 done
6326 Description: %1!ws!
6327 NDF Trace File: '%1!ws!'
6328 NDF Report File: '%1!ws!'
6329 Generating data collection and report ...
6330 Generating dump ...
6331 done
6332 failed (error=0x%1!X!)
6333 Capture Filters: Capture filters are only supported when capture is explicitly enabled with capture=yes. Supported capture filters are: CaptureInterface=<interface name or GUID> Enables packet capture for the specified interface name or GUID. Use 'netsh trace show interfaces' to list available interfaces. e.g. CaptureInterface={716A7812-4AEE-4545-9D00-C10EFD223551} e.g. CaptureInterface=!{716A7812-4AEE-4545-9D00-C10EFD223551} e.g. CaptureInterface="Local Area Connection" Ethernet.Address=<MAC address> Matches the specified filter against both source and destination MAC addresses. e.g. Ethernet.Address=00-0D-56-1F-73-64 Ethernet.SourceAddress=<MAC address> Matches the specified filter against source MAC addresses. e.g. Ethernet.SourceAddress=00-0D-56-1F-73-64 Ethernet.DestinationAddress=<MAC address> Matches the specified filter against destination MAC addresses. e.g. Ethernet.DestinationAddress=00-0D-56-1F-73-64 Ethernet.Type=<ethertype> Matches the specified filter against the MAC ethertype. e.g. Ethernet.Type=IPv4 e.g. Ethernet.Type=NOT(0x86DD) e.g. Ethernet.Type=(IPv4,IPv6) Wifi.Type=<Management|Data> Matches the specified filter against the Wifi type. Allowed values are 'Management' and 'Data'. If not specified, the Wifi.Type filter is not applied. Note: This capture filter does not support ranges, lists or negation. e.g. Wifi.Type=Management Protocol=<protocol> Matches the specified filter against the IP protocol. e.g. Protocol=6 e.g. Protocol=!(TCP,UDP) e.g. Protocol=(4-10) IPv4.Address=<IPv4 address> Matches the specified filter against both source and destination IPv4 addresses. e.g. IPv4.Address=157.59.136.1 e.g. IPv4.Address=!(157.59.136.1) e.g. IPv4.Address=(157.59.136.1,157.59.136.11) IPv4.SourceAddress=<IPv4 address> Matches the specified filter against source IPv4 addresses. e.g. IPv4.SourceAddress=157.59.136.1 IPv4.DestinationAddress=<IPv4 address> Matches the specified filter against destination IPv4 addresses. e.g. IPv4.DestinationAddress=157.59.136.1 IPv6.Address=<IPv6 address> Matches the specified filter against both source and destination IPv6 addresses. e.g. IPv6.Address=fe80::5038:3c4:35de:f4c3\%%8 e.g. IPv6.Address=!(fe80::5038:3c4:35de:f4c3\%%8) IPv6.SourceAddress=<IPv6 address> Matches the specified filter against source IPv6 addresses. e.g. IPv6.SourceAddress=fe80::5038:3c4:35de:f4c3\%%8 IPv6.DestinationAddress=<IPv6 address> Matches the specified filter against destination IPv6 addresses. e.g. IPv6.DestinationAddress=fe80::5038:3c4:35de:f4c3\%%8 CustomMac=<type(offset,value)> Matches the specified filter against the value at the specified offset starting with the MAC header. Note: This capture filter does not support ranges, lists or negation. e.g. CustomMac=UINT8(0x1,0x23) e.g. CustomMac=ASCIISTRING(3,test) e.g. CustomMac=UNICODESTRING(2,test) CustomIp=<type(offset,value)> Matches the specified filter against the value at the specified offset starting with the IP header. Note: This capture filter does not support ranges, lists or negation. e.g. CustomIp=UINT16(4,0x3201) e.g. CustomIp=UINT32(0x2,18932) CaptureMultiLayer=<yes|no> Enables multi-layer packet capture. Note: This capture filter does not support ranges, lists or negation. PacketTruncateBytes=<value> Captures only the the specified number of bytes of each packet. Note: This capture filter does not support ranges, lists or negation. e.g. PacketTruncateBytes=40
6334 Note: Multiple filters may be used together. However the same filter may not be repeated. e.g. 'netsh trace start capture=yes Ethernet.Type=IPv4 IPv4.Address=157.59.136.1' Filters need to be explicitly stated when required. If a filter is not specified, it is treated as "don't-care". e.g. 'netsh trace start capture=yes IPv4.SourceAddress=157.59.136.1' This will capture IPv4 packets only from 157.59.136.1, and it will also capture packets with non-IPv4 Ethernet Types, since the Ethernet.Type filter is not explicitly specified. e.g. 'netsh trace start capture=yes IPv4.SourceAddress=157.59.136.1 Ethernet.Type=IPv4' This will capture IPv4 packets only from 157.59.136.1. Packets with other Ethernet Types will be discarded since an explicit filter has been specified. Capture filters support ranges, lists and negation (unless stated otherwise). e.g. Range: 'netsh trace start capture=yes Ethernet.Type=IPv4 Protocol=(4-10)' This will capture IPv4 packets with protocols between 4 and 10 inclusive. e.g. List: 'netsh trace start capture=yes Ethernet.Type=(IPv4,IPv6)' This will capture only IPv4 and IPv6 packets. e.g. Negation: 'netsh trace start capture=yes Ethernet.Type=!IPv4' This will capture all non-IPv4 packets. Negation may be combined with lists in some cases. e.g. 'netsh trace start capture=yes Ethernet.Type=!(IPv4,IPv6)' This will capture all non-IPv4 and non-IPv6 packets. 'NOT' can be used instead of '!' to indicate negation. This requires parentheses to be present around the values to be negated. e.g. 'netsh trace start capture=yes Ethernet.Type=NOT(IPv4)'
6335 Name: %1!ws! Description: %2!ws!
6336 Dependent Helper Classes: Helper Class Name Description ----------------- -----------
6337 Root Cause %1!d!/%2!d! ---------------- Description: %3!ws! ID: %4!ws!
6338 Repair %1!d!/%2!d! ------------ Description: %3!ws! ID: %4!ws!
6339 Input file: %1!s! Output file: %2!s! Filter: %3!s! Overwrite: %4!s! RetainCorrelationEvents: %5!s! RetainPII: %6!s! RetainGlobalEvents: %7!s!
6340 Correlating traces ...
6341 The trace file and additional troubleshooting information have been compiled as "%1!s!".
6342 Generating data collection ...
6401 Other adapter %1:
6402 Ethernet adapter %1:
6403 Token Ring adapter %1:
6404 FDDI adapter %1:
6405 Loopback adapter %1:
6406 PPP adapter %1:
6407 SLIP adapter %1:
6408 Tunnel adapter %1:
6409 Wireless LAN adapter %1:
6410 Unknown adapter %1:
6701 Invalid value "%2!s!" for command option "%1!s!".
6702 Invalid value "%2!s!" for command option "%1!s!".
6703 One or more parameters for the command are not correct or missing.
6704 File "%1!s!" already exists.
6705 A tracing session is already in progress.
6706 Failed to start the tracing session (error=%1!d!).
6707 Circular mode requires a non-zero MaxSize parameter.
6708 There is no trace session currently in progress.
6709 Failed to stop the tracing session (error=0x%1!x!).
6710 '%1!s!' is not a valid or known provider.
6711 Overwrite=yes is not allowed with Append mode.
6712 The inbox capture driver could not be started (error=0x%1!x!).
6714 The '%1!s!' application has locked the Network Configuration database. Please close that application and try again.
6715 '%1!s!' is not a valid scenario.
6716 The scenario '%1!s!' could not be added to the tracing session (error=0x%2!x!).
6717 Packet Capture providers could not be added to the tracing session (error=0x%1!x!).
6718 The required correlation provider (%1!s!) could not be added to the tracing session (error=0x%2!x).
6719 The specified keywords are not valid for the provider '%1!s!'.
6720 The specified level is not valid for the provider '%1!s!'.
6721 The specified file '%1!s!' does not exist.
6722 Conversion failed (error=0x%1!x!).
6723 '%1!s!' is not a valid operator.
6724 '%1!s!' is not a valid range.
6725 %1!s! is not a valid interface.
6726 '%1!s!' is not a valid type.
6727 Capture filters are only allowed when capture is enabled.
6728 See 'trace %1!s! help' for detailed help.
6729 '%1!s!' is a required parameter.
6730 Network Diagnostics failed (error=0x%1!x!).
6731 The registry entry for '%1!s!' is not valid (error=0x%2!x!).
6732 Report=yes is not allowed when SaveSessionTrace=no is specified.
6733 '%1!ws!' is not a valid helper class or may not be correctly installed.
6734 <Unavailable - check helper class registration>
6735 Correlation failed (error=0x%1!x!).
6736 Activity "%1!s!" was not found.
6737 Invalid value "%2!s!" for command option "%1!s!" - Must be a GUID.
6738 The specified path '%1!s!' does not exist.
6801 Warning: The inbox capture driver could not be stopped (error=0x%1!x!).
6802 Warning: Session information could not be saved (error=0x%1!x!).
6803 Warning: Report generation failed (error=0x%1!x!).
6804 Warning: An instance of the 'NT Kernel Logger' is already running. System information will not be added to the trace file.
6805 Warning: System information could not be added to the trace file (error=0x%1!x!).
6806 Warning: Helper class attributes could not be retrieved (error=0x%1!08X!).
6807 Warning: The NDF trace file is not available.
6808 Warning: Some events were not captured due to high volume of events. Please consider using filters to reduce the volume
6809 Warning: Report generation is not supported in safe mode.
6810 Warning: Packet capture is not supported in safe mode.
6903 %systemroot%\pla\Reports\Report.System.NetTrace.xml
6904 %systemroot%\pla\Rules\Rules.System.NetTrace.xml
6907 %systemroot%\system32\NetTrace.PLA.Diagnostics.xml
6908 Network Diagnostics
6909 This data collector set collects network related data on your local system. The data to be collected includes network component traces, registry keys, system hardware information that can help troubleshoot network related problems.
6910 Microsoft Windows Network Trace
6911 Microsoft
6912 Network information collector
 

COM Classes/Interfaces

There is no type library in this file with COM classes/interfaces information

 

Exported Functions List

The following functions are exported by this dll:
InitHelperDll

 

Imported Functions List

The following functions are imported by this dll:

XP DLL Information Flash Drive Speed Extension Information Windows Password Recovery